Carbonization equipment

Carbonization equipment

Product Description


The performance of the carbonization furnace is the decisive factor that defines the perfect carbonization process. Accept a variety of raw materials. Almost all biomass wastes can be carbonized, such as wood, wood chips, coconut husks, straw, wood chips, rice husks, peels and even municipal sewage sludge. Through the carbonization process, biomass waste is converted into charcoal and is flammable. High temperature gas.

Company Profile

Appearance video

Fine workmanship, beautiful products, whole body stainless steel, frosting process, pay attention to details, only do boutique.


Use Nissei or Nord brand reducers, industrial quality from Japan and Germany.
Mud inlet

Mud inlet

The round-hole screen is used to prevent large particles and garbage from entering the dehydration body, reducing machine wear and improving machine service life.
7-shaped blade

7-shaped blade

The mixing is more complete and the flocculation effect is better.
Industry standard wiring

Industry standard wiring

The mixing is more complete and the flocculation effect is better.

Technological principle

The carbonization furnace is a horizontal rotating body, which uses indirect heating method. The hot blast furnace at its side generates high temperature and heats the rotatable furnace body. The materials in the furnace body decompose under low oxygen condition, producing a large amount of retort gas, which is led into the combustion chamber by the induced draft fan for secondary combustion. The materials are transported from the end of the furnace body, and the output end is provided with belt There is a product condensation and collection system to collect the product after cooling; the high-temperature flue gas from combustion is pumped to the super dryer for drying sludge. In terms of tail gas treatment, when the temperature in the combustion furnace reaches above 800 ℃, the dry distillation gas can be completely burned to achieve harmless treatment. After the exhaust gas is cooled by a water-cooled heat exchanger, it is dedusted by a cyclone and discharged into the atmosphere.

Work Flow of Carbonization Furnace

1、The big bulks biomass waste should be shredded by a wood shredder or wood crusher at first. Usually, the diameter should be ≦ 200 mm and the thickness ≦ 30 mm.
2、The biomass will be feed into the drying host automatically by constant weight feeder. If the biomass material contain water, it should be dried until the water content is < 20%.
3、The biomass will automatically fall down to the carbonization host and the furnace will start the process of carbonization.
4、The main processes of carbonization furnace: high-temperature pyrolysis, smoke discharge, sulfur releasing and carbon collection.
5、Charcoal will be discharged from the powder discharge port.
6、Combustible gas generated during biomass carbonization process will flow to the cyclone dust collector. After spraying and de-dusting, it will be separated into wood tar and wood vinegar and used as fuel to heat the carbonization host from the outside.
7、The residual gas produced during the heating will also be collected to heat the drying system.

Packing and Delivery

1. The normal package is wooden box(Size: L*W*H). If export to European countries,the wooden box will be fumigated.If container is too tighter,we will use pe film for packing or pack it according to customers special request.

2. We also support 20',40' container delivery, use soft packaging to protect machine well. If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

 hydrothermal carbonization equipment
biomass carbonization equipment
carbonization furnace equipment
carbonization process equipment